Understanding Scale Up of The Tablet Compaction -3
Source : Yenchen Technical Process Consultant, Dr. Fred Rowley
Operation The Controls on All Modern Tablet Presses:
5. Powder Hopper:
- height
- position of a slide gate
6. Feeder speed
- The Paddle or Powder Assisted Feed Frame
- With the introduction of high speed presses the Wheel or Power assisted feed frame became mandatory.
- This feeder does not "force" powder into the die; it helps keep the powder flow up with the tablet press.
- The speed of the feeder wheels is a critical operating parameter.
7. Turret speed
- Setpoint with a range.
- Lowest speed is usually the minimum press speed recommended by the press manufacturer.
- Speed range must be validated.
- (Review factors for weight control)
- (Review factors for tablet hardness control)
- (Review factors for capping!)
- (Review factors for picking/sticking!)
If you have any technical questions, please contact with Grace Chiang Email:grace.chiang@yenchen.com.tw
Copyright © 2019 YENCHEN MACHINERY CO., LTD. All Rights Reserved.