High Shear Mixer
- Mixing: Powder and powder
- Granulation: Powder and binder
Description of the process
- By using vacuum system or lifting system to transfer powder from an IBC (Intermediate Bulk Container) into the mixing bowl.
- Serveral kinds of powder can be uniformly mixed by using the main impeller.
- Binder (solution) can be sprayed from pressure tank (or solution tank) to powder by the spray nozzle.
- Then the high-speed chopper breaks the agglomerates into granules.
- Finished wet granules will be discharged from discharge valve.
(The finished wet granules can be also transferred to a container of Fluid Bed Dryer via an in-line mill.)
- Laboratory Models: SMG-3, SMG-5, SMG-10, SMG-20
- Laboratory Multi-bowl Model: SMG-3/2/1, SMG-10/5, SMG-20/10
Optional devices are available
- Solution spray system: by using pressure or pump to transfer
- Human-Machine Interface (HMI) design
- The end point control of granlation: by ampere or lorque
- Explosion Proof Device: for organic solvent
- Jacket: for cooling or heating
- Discharge with Cone Mill, and can be connected to the Fluid Bed Dryer
- Material transfer: by vacuum suction or lifting system
- WIP system
- Main Impeller Lifting System for cleaning
- Preparation Tank
1. Follows the regulations of cGMP, PIC/S GMP, FDA.
2. High uniformity of mixing: Even with big difference of bulk density of powder still can mix very well. Binder (solution) can be sprayed from pressure tank (or solution tank) to powder by the spray nozzle.
3. High Shear Mixer Operates just in Short mixing time
3a. Dry mixing: 2~5 minutes
3b. Granulation: 5~10 minutesFinished wet graules will be discharged from the discharge valve. (The finished wet granules can be also transfered to a container of Fluid Bed Dryer via an in-line mill.)
4. Multi-safety Interlock System:
4a. Stop operation when the cover is not closed properly
4b. Stop operation when the cover of discharge valve is not closed properly
4c. Stop operation when the air pressure is not sufficient for the seal
5. Separated compressed air routes of the High Shear Mixer is especially designed to meet the good air quality: the compressed air for air seal will pass through an air filter. For the cylinder, the compressed air will pass through lubricating oil to ensure the air quality and lubrication
6. Equipped with unique design of the air seal: This design can prevent powder access into the main seal and the chopper to prevent powder dropping
7. The clearance between impeller and the bottom of mixing bowl is only about 0.5~0.8 mm; therefore, high mixing efficiency can be achieved
8. Clamps of the cover: special designed by an eccentric wheel of clamps for easy operation and well sealed
|Model||Full Capacity||Working Capacity||Main Drive (60Hz)||Main Drive (60Hz)||Chopper Drive (60Hz)||Chopper Drive (60Hz)||Average Working Batch|
|L||L||Kw||rpm||Kw||rpm||Kg||Kg||L x W x H (mm)|
|YC-SMG-20||20||14||2/2.5||172||0.75||1000~3440||3~5||200||1560 x 540 x 1500|
|YC-SMG-100||100||70||3.7/5.5||172/120||1.5/2.2||1720/3440||25-35||850||2100 x 700 x 2000|
|YC-SMG-150||150||105||7.5/11.2||172/120||2.2/3.7||1720/3440||35-50||1000||2300 x 850 x 2500|
|YC-SMG-250||250||175||11.2/15||172/120||3.7/5.5||1720/3440||68-85||1500||2420 x 900 x 2500|
|YC-SMG-300||300||210||15/22.5||160/105||3.7/5.5||1720/3440||75-105||1900||2600 x 950 x 2500|
|YC-SMG-400||400||280||22.5/26.5||145/95||5.5/7.3||1720/3440||100-150||2500||2800 x 2700 x 3200|
|YC-SMG-600||600||420||37||120||11.2||1720/3440||150-200||3100||3000 x 3000 x 3500|
|YC-SMG-800||800||560||45||120||15||3440||200-300||3500||3150 x 4000 x 3500|
|YC-SMG-1000||1000||700||56||80||18.5||3440||250-300||3800||3350 x 4000 x 4000|
|YC-SMG-2000||2000||1400||112||80||22||3440||500-700||4800||4000 x 4000 x 4500|
- Pharmaceutical: Powder mixing, granulating with binder before tabletting.
- Food: Fruit favored tablet, seasoning and healthy food granulation.
- Chemical material mixing and granulation.
- Electronic material mixing and granulation.
- Files Download
Over 50 Years High Shear Mixer | Pharmaceutical Processing Equipment | Yenchen
Based in Taiwan, YENCHEN MACHINERY CO., LTD., since 1967, is a High Shear Mixer | pharmaceutical processing machinery supplier. Pharmaceutical production lines used in the pharma, food, biotechnology, chemical, and cosmetic fields, which include solid dosage line, pellet machine production line, syrup line, injection line, ointment line, extraction & concentration turn key equipment.
Worldwide sales references in over 70 countries, 6000 square meter production factory allows high-quality pharmaceutical equipment supplies. Hundreds of similar companies have been enjoying our pellet & pharmaceutical processing machinery and services for years.
Yenchen has been offering customers high-quality pharmaceutical equipment since 1967, both with advanced technology and 53 years of experience, Yenchen ensures each customer's demands are met.