BIN (IBC) & BIN System
BIN
Bin (also known as Inermediate Bulk Container, IBC) and Bin system are for powder handling application to store, transfer and mix for close containment. They are very easy to transfer and clean. The volume of IBC is from 20 Liters up to 1500 Liters, the optional device of Vacuum Suction Device is available to fit with the IBC.
Fluid Bed Dryer, Granulator, Coater
FBDD-B/G
Top Spray Granulation: Spray atomized binder or active ingredients on the fluidized to form the uniformity granules.Bottom Spray Coating: The concept of Bottom Spray Coating is also known as Air Suspension Coating, is to separate pellets or granules from one another in an air stream and spray a coating binder onto the pellets or granules while they are suspended. When the hot air passes through the bottom screen of a container and draft tube (Wuster insert), it will generate the siphon principle. The granules will fall down and will be sucked into the draft tube (Wuster insert) again, while the bottom spray gun will spray towards top to achieve coating purpose.Side Spray Powder Coating/Film Coating: The Side Spray is better for coating with high firm content. The cores (seeds) are placed on the turntable and hot air is blown upward between the turntable and the granulation area. The coating solution is sprayed on the rolling cores through the pump and spray gun. The process involves simultaneous coating and drying of the cores, the repeated actions achieve the desired coating thickness or granule size. Powder Coating is achieved by charging powder and spray binder at the same time.
Fluid Bed Dryer
FBD
Drying: The high drying efficiency is because the powder or granules are fluidized in the drying chamber and the container is using a turbo blower, the hot air passed through the powder or granules from bottom to the top of drying chamber to remove the humidity.Granulation: Spray atomized binder or active ingredients on the suspension powder by spray guns to formm the uniformity granules.
High Shear Mixer
SMG
In the cone-shaped vessel, the main impeller mixes the powder into fluidized vortex and forms agglomerates with the binder solution. Then the high speed chopper breaks the agglomerate into granules by a high speed rolling action.
Super Mixer, Granulator, Dryer
SMGD
Mixing and Granulation: The main impeller mixed the powder into a fluidized vortex and forms agglomerates with the binder solution. Then the high-speed chopper breaks the agglomerates into granules by a rolling action.Drying (Use vacuum drying system): The Mixing Tank is heated by the hot water in jacket; the wet granules are rolling slowly and dehydration by vacuum suction to reach to drying efficiency.